Publications

Journal Papers

· Evans, J. W., Abbasi, M. H., Sarin, A., “A Monte Carlo Simulation of the Diffusion of Gases in porous Solids”, J. Chem. Phys., Vol. 72, No. 5, 1980.

· Abbasi, M. H., Evans, J. W., “A Monte Carlo Simulation of Radiant Transport Through an Adiabatic Packed Bed or Porous Solid”, AIChE Journal, Vol. 28, No. 5, 1982.

· Abbasi, M. H., Evans, J. W., Abramson, I. S., “Diffusion of Gases in Porous Solids: Monte Carlo Simulations in Knudsen and Ordinary Diffusion Regimes”, AIChE Journal, Vol. 29, No. 4, 1983.

· Abbasi, M. H., “Thermodynamic Investigation of Copper Removal from Liquid Slags”, Journal of Engineering, Islamic Republic of Iran, Vol. 5, No. 3, 1992.

· Aryanpour, G., Abbasi, M. H., “Kinetic Analysis of Molybdenite Roasting”, ESTEGHLAL, Journal of Engineering, Isfahan University of Technology, No. 11, 1992.

· Aryanpour, G., Abbasi, M. H., “Simulation of Gas Diffusion in Capillaries and porous Solids”, ESTEGHLAL, Journal of Engineering, Isfahan University of Technology, No. 12, 1992.

· Abbasi, M. H., Blairs, S., “Correlation Between Potential Well Depth and Melting Temperature of Liquid Metals”, Phys. Chem. Liq., Vol. 25, 1993.

· Blairs, S., Abbasi, M. H., “Evaluation of Ultrasonic Velocity in Liquid Metals”, ACUSTICA, Vol. 78, 1993.

· Blairs, S., Abbasi, M. H., “Internal Pressure Approach for the Estimation of Critical Temperature of Liquid Metals”, ACUSTICA, Vol. 79, 1993.

· Abbasi, M. H., Safarnoorallah, M., “Extraction of Vanadium Oxide from Boiler Fuel Ash”, ESTEGHLAL, Journal of Engineering, Isfahan University of Technology, Vol. 17, No. 1, 1998.

· Saidi, A., Abbasi, M. H., Safarian, J., “Determination of Relationship Between Autoignition of Sponge Iron and Specification of the Iron Ores”, ESTEGHLAL, Journal of Engineering, Isfahan University of Technology, Vol. 19, No. 1, 2000.

· Aryanpour, G., Abbasi, M. H., “Computer Simulation of Ordinary Gas Transfer in Tubes”, Journal of Porous Media, Vol. 8, No. 4, 2005.

· Aryanpour,G.,Abbasi,M.H.,"Simulation of Ordinary Gas Transfer in Porous Solids With Tubular Inclined Pores",Journal of Porous Media,Vol.9,No.3,2006.

· Ebrahimi,R.,Abbasi,M.H.,Saidi,A.,"Mechanochemical Effects on the Molybdenite Roasting Kinetics","Chemical Engineering Journal",121,2006,

· Blairs,S.,Abbasi,M.H.,"Correlation Between Surface Tension and Critical Temperatures of Liquid Metals", Journal of Colloid and Interface Science,Vol.304,No.2,2006.

· Ebrahimi,R.,Abbasi,M.H.,Saidi,A.,"Model Fitting Approach to Kinetic Analysis of  Non-Isothermal Oxidation of Molybdenite",  Iranian Journal of Chemistry&Chemical Engineering,Vol.26,No.2,2007.

· Aryanpour,G.,Abbasi,M.H.,"Identification of Viscoplastic Behavior of Metal Powders Using Pressureless Sintering Results",Journal of Porous Media,Vol.10,No.7,2007.

· Mousavi,T.,Abbasi,M.H.,Karimzadeh,F.,Enayati,M.H.,"Thermodynamic Analysis of NiTi Formation by Mechanical Alloying",Submitted to Journal of Materials Science for Publication.

· Mousavi,T.,Karimzadeh,F.,Abbasi,M.H..,"Synthesis and Characterization of Nanocrystalline NiTi Intermetallic by Mechanical Alloying", Journal of Materials Science and Engineering : A , Vol.487,2008, 46-51.

· Aryanpour,G.,Aryanpour,F.,Abbasi,M.H.,Ershadi,A.,"Simulation de la Diffusion des Gaz dans les Capillaries en Regime de Knudsen", Oil & Gas Science and Technology-Rev.IFP , Vol.62,No.5,2007,pp.673-681.

· Samadi,M.,Shamanian,M.,Panjepour,M.,Saidi,A.,Abbasi,M.H.,and Asgharzadeh,F.,"Investigation of MoSi2 Formation in the Presence of Copper by Self-Propagating High Temperature Synthesis", Journal of Alloys and Compounds,Vol.462,2008,229-234.

 

· Mousavi,T.,Abbasi,M.H.,Karimzadeh,F.,Enayati,M.H.,"Mechanism and Heat of Formation of Nanocrystalline NiTi Intermetallic Produced by Mechanical Alloying",ESTEGHLAL,Journal of Engineering,Isfahan University of Technology,Vol.26.No.2,2008,pp.59-70.

· Mousavi,T.,Karimzadeh,F.,Abbasi,M.H.,Enayati,M.H.,"Investigation of Ni Nanocrystallization and the Effect of Al2O3 Addition by High- Energy Ball Milling", Journal of Materials Processing Technology,Vol.204,2008,125-129.

· Soleimani,A.,Abbasi,M.H.," Silica Aerogel,Properties and Characterization ",  Journal of Materials Processing Technology,Vol.199,2008,pp.10-26.

· Asgharzadeh,F.,Abbasi,M.H.,Saidi,A.,Shamanian,M., "Formation Mechanism of MoSi2 in the Presence of Copper by Combustion Synthesis: A Study in Thermal Explosion Mode., Powder Metallurgy, Vol.51,No.3, 2008.

· Ebrahimi,R.,Abbasi,M.H.,"Evaluation of the Reliability of Coats-Redfern Method for the Kinetic Analysis of Non-isothermal TGA",Trans. of Non-ferrous Metals Society of China,Vol.18,No.1,2008,pp.217-221.

· Mousavi,T.,Karimzadeh,F.,Abbasi,M.H.,"Mechanochemical assisted synthesis of NiTi intermetallic based nanocomposite reinforced by Al2O3 ",Journal of Alloys and Compounds, 467, 2009, 173-178.

· Tahmasbi,R. Shamanian,M., Abbasi,M.H., Panjepour,M. "Effect of Iron on Mechanical Activation and Structural Evolution of Hematite-Graphite Mixture", Accepted for publication by Journal of Alloys and Compounds.

· Esmaeili Ghayoumabadi ,M. ,Saidi,A., Abbasi,M.,H., " Lattice Variations and Phase Evolutions During Combustion Reactions in Mo-Si-Al System " , In Press by Journal of Alloys and Compounds.

· Samadi Khoshkhoo,M., Shamanian,M., Saidi,A., Abbasi,M.H., Panjepour,M., Asgharzadeh Javid,F. "The Effect of Mo Particle Size on SHS Synthesis Mechanism of MoSi2 ", In Press by Journal of Alloys and Compounds.

· Mousavi,T., Abbasi,M.H., Karimzadeh,F., Enayati,M.H., "Heat Treatment Effects on Structure and Properties of Synthesized Nanocrystalline NiTi Intermetallic by Mechanical Alloying ", International Journal of Modern Physics B, Vol.22,Nos.18&19,2008,2970-2978.

· Haghir,T.,Abbasi,M.H.,Gologar,M.A.,Panjepour,M.," Investigation of alpha to gama transformation in the production of a Nanostructured High Nitrogen Austenitic Stainless Steel Powder via Mechanical Alloying " , In Press by Journal of Materials Science and Engineering: A.

· Jafari,M.,Enayati,M.H.,Abbasi,M.H.,Karimzadeh,F. " Thermal Stability and structural Changes During Heat Treatment of Nanostructured Al2024 Alloy " In Press by Journal of Alloys and Compounds.

· Mousavi,T.,Abbasi,M.H.,Karimzadeh,F.," Thermodynamic Analysis of NiTi Formation by Mechanical Alloying ", Accepted for publication by Journal of Materials Letters ".

 

Conference Papers

 

· Nakano, Y., Abbasi, M. H., Evans, J. W., “A New Predictive Technique for the Diffusion of Gases in Porous Solids”, Proceedings of the International Symposium of the Physical Chemistry of Iron and Steelmaking, Toronto, Canada, 1982.

· Omidi, B., Abbasi, M. H., Monshi, A., “Production of Catalysts for Direct Reduction”, Proceedings of Steel Symposium, Isfahan University of Technology, Isfahan, Iran, 1996.

· Ghadirzadeh, D., Saatchi, A., Abbasi, M. H., “Research and Development of Coatings to Prevent Steel Oxidation in Preheating Furnaces”, Proceedings of Steel Symposium, Isfahan University of Technology, Isfahan, Iran, 1996.

· Safarnoorallah, M., Abbasi, M. H., “Recovery of Vanadium Oxide from Boiler Fuel Ash”, Proceedings of the first Seminar on Non-Ferrous Metallurgy of Iran, Sarcheshmeh Copper Complex, Sarcheshmeh, Iran, 1996.

· Ebrahimi, R., Abbasi, M. H., Saidi, A., “Studies on Salt Roasting of Sarcheshmeh Molybdenite for Producing Pure Molybdenum Oxide”, Proceedings of the Second National Congress of Chemical Engineering, Amir Kabir University, Tehran, Iran, 1996.

· Shamanian, M., Abbasi, M. H., Pishva, M., “Reducing Gas Quality in Ghaem II Direct Reduction Plant and Optimization of the Parameters”, Proceedings of the Second Annual Congrees of Iranian Metallurgical Engineers Society, Sharif University of Technology, Tehran, Iran, 1998.

· Saidi, A., Abbasi, M. H., Kay Yeganeh, A., “Determining the Optimum parameters for using Chadormaloo iron ore in Mobarakeh Steel Complex”, Proceedings of the Second Annual Congress of Iranian Metallurgical Engineers Society, Sharif University of Technology, Tehran, Iran, 1998.

· Saghafifar, H., Saidi, A., Abbasi, M. H., “Sic Production by (SHS) Method”, proceedings of the Second Annual Congress of Iranian Metallurgical Engineers Society, Sharif University of Technology, Tehran, Iran, 1998.

· Saidi, A., Abbasi, M. H., Safarian, J., “Statistical Studies on Autoignition of DRI in Mobarakeh Steel Complex”, Proceedings of the Second Annual Congress of Iranian Metallurgical Engineers Society, Sharif University of Technology, Tehran, Iran, 1998.

· Kay Yeganeh, A., Saidi, A., Abbasi, M. H., Izadi, J. Refahi, M., Poorfarahani, H., Amin. M., “Reduction Behavior of Different Chadormaloo Iron Ore Mixtures for Midrex Direct Reduction”, Proceeding of Steel Symposium, Isfahan University of Technology, Isfahan, Iran, 1999.

· Safarian, J., Saidi, A., Abbasi, M. H., Izadi, J., Refahi, M., Amin, M., Poorfarahani, H., “Reoxidation Behaviour of DRI Produced in Mobarakeh Steel Complex”, Proceedings of Steel Symposium, Isfahan University of Technology, Isfahan, Iran, 1999.

· Khodaie, A., Saatchi, A., Abbasi, M. H., Pishva, M., “Microstructure of Ferritic-Pearlitic Steel Produced in Isfahan Steel Company and its relationship with Mechanical Properties”, Proceedings of Steel Symposium, Isfahan University of Technology, Isfahan, Iran, 1999.

· Esmailpoor, R., Monshi, A., Saidi, A., Abbasi, M. H., “Ceramic Welding of Silica Refractories”, Proceedings of Steel Symposium, Isfahan University of Technology, Isfahan, Iran, 1999.

· Torki, H., Saidi, A., Abbasi, M. H., Esmailpoor, R., Rezaei, A., “Evaluation of the Possibility of Using Lump Iron Ore in Mobarakeh Steel Company Midrex Modules”, Proceedings of Steel Symposium, 2004, Yazd (Bafgh), Iran.

· Golmakani, M. H., Saidi, A., Abbasi, M. H., Shafyei, A., Solaymanpoor, R., Esmailpoor, R. Ashigh, M., “Investigation of Solid Fuel Consumption in Pelletizing Unit in Mobarakeh Steel Company”, Proceedings of Steel Symposium, 2004, Yazd (Bafgh), Iran.

· Golmakani, M. H., Saidi, A., Abbasi, M. H., Solaymanpoor, R., “The Influence of Using Solid Fuel on the Productivity of Pelletizing Unit in Mobarakeh Steel Company”, Proceedings of the 8th Annual Congress of Iranian Metallurgical Engineers Society, Isfahan University of Technology, Isfahan, Iran. 2004.

· Saidi, A., Abbasi, M. H., Zarrin, Y., Solaymanpoor, R., Esmailpoor, R., Rezaei, J. “Evaluation of Pelletizibility Properties of Iran Private Mines Iron Ore”, Proceedings of the 8th Annual Congress of Iranian Metallurgical Engineers Society, Isfahan University of Technology, Isfahan, Iran, 2004.

· Ebrahimi, R., Abbasi, M. H., Saidi, A. “Influence of Mechanical Activation on the Ferric Chloride Leaching of Molybdenite Concentrate”, Proceedings of the First Jordanian International Conference of Materials Science and Engineering, AL-SALT-JORDAN, 2005.

 

· Esmaeili, M., Saidi, A., Abbasi, M. H., “Production of Molybdenum Aluminosilicide by Self-Propagating high-temperature Synthesis”, Proceedings of the First Jordanian International Conference of Materials Science and Engineering, AL-SALT-JORDAN, 2005.

· Ebrahimi,R.Abbasi,M.H.,Saidi,A.,"Kinetic Studies on Molybdenite Oxidation Using Non-isothermal Thermogravimetry Techniques",Proceedings of 9th Congress of the Iranian Metallurgical Society,Shiras University,Shiras,Iran,Nov.2005.

· Javid,F.,Abbasi,M.H.,Saidi,A.,Samadi,M."Effect of Copper Presence on the Mechanism and Combustion Synthesis Products of Mo and Si Powders",Proceeding of the 10th Iranian Metallurgical Engineers Society Congress,Ferdowsi University of Mashhad,Mashhad,Iran,Nov.2006.

· Ebrahimi,R.,Abbasi,M.H.,"Evaluation of Coats-Redfern Method Accuracy for Determination of Kinetic Parameters of Non-isothermal Processes",Proceedings of the 10th Iranian Metallurgical Engineers Society Congress,Ferdowsi University of Mashhad,Mashhad,Iran,Nov.2006.

· Javid,F.,Saidi,A.,Abbasi,M.H.,Samadi,M.,"Production of MoSi2 by Mechanical Alloying in the Presence of Copper",Proceedings of the 10th Iranian Metallurgical Engineers Society Congress,Ferdowsi University of Mashhad,Mashhad,Iran,Nov.2006.

· Mousavi,T.,Abbasi,M.H.,Enayati,M.H.,Karimzadeh,F.,"The Effect of Al2O3 on Synthesis of Ni Nanocrystalline Powders by High-Energy Milling",Proceedings of the First International Congress on Nanoscience and Nanotechnology,University of Tehran,Dec.2006.

· Samadi,M.,Shamanian,M.,Panjehpoor,M.,Abbasi,M.H.,Javid,F.,"Investigation of MoSi2 Formation in the Presence of Copper by Self-Propagating High-Temperature Synthesis",Proceedings of International Symposium for Research Scholars on Metallurgy,Materials Science&Engineering(ISRS-2006),India,Dec.2006.

· Haydari,A.,Panjehpoor,M.,Shamanian,M.,Abbasi,M.H.,"The Effect of Coke Particle Size on Thermal Profile in Sinter Bed",Proceeding of Steel Symposium 85,Amirkabir University of Technology,Tehran,March 2007.

· Asgharzadeh,F.,Abbasi,M.H.,Saidi,a.,Samadi,M.,"Production and Microstructure Evaluation of MoSi2 in the Presence of Cu by Mechanical Alloying",Proceedings of International Symposium for Research Scholars on Metallurgy,Materials Science&Engineering(ISRS 2006),India,Dec.2006.

· Mousavi,T.,Karimzadeh,F.,Abbasi,M.H.,"Heat Treatment of Nanocrystalline NiTi Intermetallic Produced by Mechanical Alloying " ,International Conferece on Ultrafine Grained and Nanostructured Materials , 17-18 November 2007, University of Tehran.

· Mousavi,T., Abbasi,M.H., Enayati,M.H., Karimzadeh,F., "Fabrication of Nickel Nanostructure Powder by Milling ", Proceedings of the First Conference of Nonotechnology in Environment ",21-22 February 2007, Isfahan University of Technology, Isfahan, Iran.

· Mousavi,T., Abbasi,M.H., Karimzadeh,F., Enayati,M.H.," Fabrication of Nanostructure NiTi Intermetallic by Mechanical Alloying ", Proceedings of the Second Nanotechnology Conference , 5-6 September 2007, Kashan, Iran.

 

· Soroush,S.,Vahid Dastjerdi,H.,Rezazadeh,M.,Kermanpoor,A.,Abbasi,M.H.," Fabrication and Characterization of Porous Alumina Substrate for Nanofiltration Application by Slip Casting ", Proceedings of the 11th Annual Conferece of the Iranian Metallurgical Engineers Society and 19th Annual Conference of the Iranian Foundryman Society, 23-25 October, 2007 Esfahan Steel Company (ESC), Isfahan, Iran.

· Tahmasbi,R., Panjehpoor,M., Shamanian,M., Abbasi,M.H., " The Effect of Mechanical Activation on Structural Evolution of Hematite – Graphite Mixture in the Presence of Iron " , ", Proceedings of the 11th Annual Conferece of the Iranian Metallurgical Engineers Society and 19th Annual Conference of the Iranian Foundryman Society, 23-25 October, 2007 Esfahan Steel Company (ESC), Isfahan, Iran.

· Samadi,M., Shamanian, M., Saidi,A., Abbasi,M.H., Panjehpoor,M., Asgharzadeh,F., "A Derivative Theory to Derive the Activation Energy of Pyrotechnic Mixtures ", Proceedings of the 11th Annual Conferece of the Iranian Metallurgical Engineers Society and 19th Annual Conference of the Iranian Foundryman Society, 23-25 October, 2007 Esfahan Steel Company (ESC), Isfahan, Iran.

· Samadi,M., Shamanian,M., Saidi,A., Abbasi,M.H., " Effect of Copper Addition on Temperature Profile of Mo-2Si Pyrotechnic Mixtures ", Proceedings of the 11th Annual Conferece of the Iranian Metallurgical Engineers Society and 19th Annual Conference of the Iranian Foundryman Society, 23-25 October, 2007 Esfahan Steel Company (ESC), Isfahan, Iran.

· Haghir, T., Abbasi,M.H., Panjepoor,M., Golozar,M.A., " Production of High Nitrogen Austenitic Stainless Steel by Mechanical Alloying ", Proceedings of the 11th Annual Conferece of the Iranian Metallurgical Engineers Society and 19th Annual Conference of the Iranian Foundryman Society, 23-25 October, 2007 Esfahan Steel Company (ESC), Isfahan, Iran.

· Ahmadian,M., Abbasi,M.H., Panjehpour,M., Soleimanpoor,R., Etesami,M., Esmailpoor,R., Khani,A., Ashigh,M., " Evaluation of Direct Reduced Iron Carburization Using Different Iron Ores ", Proceedings of Steel Symposium 86 , 19-20 February 2008, Persian Gulf Mining & Metal Industries Special Zone, Bandar Abbas , Iran.

· Tahmasbi,R., Panjehpour,M., Abbasi,M.H., Shamanian,M., " The Effect of Mechanical Activation on Reduction of Hematite-Graphite Mixture in The Presence of Iron " , Proceedings of Steel Symposium 86 , 19-20 February 2008, Persian Gulf Mining & Metal Industries Special Zone, Bandar Abbas , Iran.

· Abdeyazdan,H., Edris,H., Abbasi,M.H., " The Effect of Flux Type and Oxygen Blowing on Simultaneous Removal of Phosphorus and Sulfur From Molten Iron ", Proceedings of Steel Symposium 86 , 19-20 February 2008, Persian Gulf Mining & Metal Industries Special Zone, Bandar Abbas , Iran.

· Azardoodran,H.,Panjepour,M.,Abbasi,M.H.," The Effect of Mechanical Activation on Carbothermic Reduction of Molybdenite in the Presence of Lime,A Nonisothermal Study ", The Second Joint Conference of 12th Iranian Metallurgical Engineers Society Annual Congress and 20th Iranian Foundry Society Seminar, Islamic Azad University, Karaj, Iran, 18-19 Nov.,2008.

 

· Haydari,A.,Dabbagh,A.,Panjepour,M.,Shamanian,M.,Abbasi,M.H.,"The ffect of Coke Particle Size On Iron Ore Sinter Reducibility, A Mathematical Model The Second Joint Conference of 12th Iranian Metallurgical Engineers Society Annual Congress and 20th Iranian Foundry Society Seminar, Islamic Azad University, Karaj, Iran, 18-19 Nov.,2008.

· Haghir,T.,Panjepour,M.,Abbasi,M.H.,Golozar,M.A., "The Effects of Nitrogen and Mechanical Alloying on Ferrite/Austenite Phase Transformation in High Nitrogen Austenitic Stainless Steel ", The Second Joint Conference of 12th Iranian Metallurgical Engineers Society Annual Congress and 20th Iranian Foundry Society Seminar, Islamic Azad University, Karaj, Iran, 18-19 Nov.,2008.

Reports

· Direct Reduction: Its Role and Significane in Steel Industry, Ahwas Steel Complex, 1982.

· Sarcheshmeh Molybdenite Roasting in a Multiple Hearth Reactor, Isfahan University of Technology, Isfahan, Iran.

· Studies on Gas Producing Reactor in Ghaem II Direct Reduction Plant in Isfahan Steel Company, Isfahan, Iran, 1998.

· Using Chadormaloo Iron Ore in Mobarakeh Steel Complex to Produce good Quality DRI, Isfahan, Iran, 1999.

· Ceramic Welding of Refractories in Coke Ovens, Isfahan Steel Company, Isfahan, Iran, 1999.

· Removal of Tramp Elements from Molten Steel,Isfahan Steel Company,Isfahan,Iran.